Residential Spray Foam Removal in Bath
Specialist spray foam removal for homeowners across Bath and Somerset
Residential Spray Foam Removal in Bath is what we do every day. If spray foam insulation is blocking your mortgage, trapping damp in your roof, or making your home hard to sell, our team removes it cleanly and safely. We also offer home spray foam removal in Bath, Somerset for lofts, attics, cavity walls and roofs. Call 0122 528 5137 for a free assessment.
Residential Spray Foam Removal in Bath
Residential Spray Foam Removal in Bath is the controlled extraction of open cell or closed cell spray foam from lofts, attics, roof voids and cavity walls. We use dry ice blasting machines, reciprocating saws and HEPA filter vacuums to take the foam back to bare timber without damaging your roof structure. Every job starts with a boroscope inspection camera and moisture meter survey so we know exactly what we are dealing with before we cut anything.
Most homeowners in Bath call us because a mortgage lender has refused to lend on a property with spray foam in the roof. Others have noticed a chemical smell, condensation on rafters, or a surveyor flagging trapped moisture and rot. If you need domestic spray foam removal in Oldfield Park or a residential insulation removal Bath 24/7 response, we cover the whole city. We also handle cavity wall insulation and loft insulation removal where foam has spread.
Why Remove Spray Foam From Your Bath Home
Spray foam removal is not just about passing a mortgage survey. It protects your roof timbers, restores ventilation, and makes your property sellable again. Here is what you gain.
Unblock Your Mortgage
Mortgage refusal due to spray foam is the number one reason Bath homeowners call us. Lenders often refuse loans on properties with foam in the roof because they cannot inspect the timbers. We remove the foam, provide photographic evidence and a removal certificate so your lender can proceed. Most jobs take one to three days.
Stop Trapped Moisture
Closed cell spray foam seals roof timbers and stops them breathing. In Bath's damp climate that leads to trapped moisture and rot within a few winters. We strip the foam back, check every rafter with a moisture meter, and treat any early rot before it becomes structural. You get a dry, ventilated roof void again.
Remove Smells and Fumes
Spray foam smell and fumes can linger for years, especially with isocyanate foam. We use dust extraction units and PPE respirators to remove the source safely, then ventilate the loft space. Customers in Widcombe and Larkhall often tell us the difference is noticeable within 48 hours of removal.
Make Your Home Sellable
Difficulty selling property is common when spray foam shows up on a survey. Estate agents in Bath will often advise removal before listing. We provide a full removal report with before and after photos, which you can hand to buyers, surveyors and solicitors. That paperwork alone has helped dozens of local sales complete.
Our Spray Foam Removal Process
Every residential spray foam removal in Bath follows the same five steps. You get a clear plan, a fixed price and a clean site at the end. Here is exactly what happens from first call to final inspection.
Free Survey
We visit your Bath property, inspect the loft or cavity with a boroscope inspection camera, and take moisture readings from the timbers. You get a written report with photos and a fixed price. Most surveys take 45 to 60 minutes and there is no charge.
Site Protection
On day one we lay dust sheets and protective sheeting across floors, stairs and doorways. We seal the loft hatch with a dust extraction unit so no foam particles escape into your living space. This setup usually takes 30 to 45 minutes before any cutting starts.
Foam Extraction
Our technicians use dry ice blasting machines, reciprocating saws and oscillating multi-tools to break up the foam. A HEPA filter vacuum runs continuously to capture debris. A typical three-bedroom Bath loft takes one to three days depending on foam thickness and type.
Timber Inspection
Once the foam is gone we inspect every rafter and joist with a moisture meter and thermal imaging camera. Any rot or structural timber damage is logged and treated. We also check roof ventilation is restored so the roof void can breathe again.
Clean and Certify
We vacuum the entire space, remove all protective sheeting and dispose of the foam at a licensed waste facility. You receive a removal certificate and a photo pack showing the bare timbers. That documentation is what mortgage lenders and surveyors want to see.
Spray Foam Removal Specialists in Bath
Platinum Shield Spray Foam has been removing residential spray foam in Bath since 2021. In five years we have completed hundreds of removals across Somerset, from Victorian terraces in Widcombe to 1970s houses in Combe Down. Our technicians hold NVQ Level 2 Insulation and CITB qualifications, and we work to BPCA certification standards for safe foam handling. We carry full CHAS accreditation, Constructionline and SafeContractor registration, and we are a TrustMark registered business. We also hold PASMA certification for safe working at height.
- Five years removing spray foam from Bath homes since 2021
- NVQ Level 2 Insulation and CITB qualified technicians
- BPCA certification for safe foam handling and disposal
- CHAS, Constructionline and SafeContractor accredited
- TrustMark registered and PASMA certified for roof work
Why Choose Our Residential Spray Foam Removal in Bath
We are not a general builder who removes foam on the side. Spray foam removal is all we do, and we do it across Bath every week. Here is what sets our service apart.
Fixed Prices, No Surprises
You get a fixed price after the free survey, not an hourly rate that creeps up. Most Bath lofts fall between 1200 and 3500 pounds depending on foam type and access. We confirm the price in writing before we start and it does not change unless you ask us to do extra work.
Mortgage-Ready Paperwork
We provide a removal certificate, before and after photos, and a timber condition report. Lenders and surveyors accept our documentation because it shows the roof void is clean and ventilated. We have helped homeowners in Bath City Centre and Kingsmead complete sales that were previously stuck.
Clean, Controlled Removal
Foam dust is the biggest complaint about cheap removal jobs. We use dust extraction units and HEPA filter vacuums on every job, and we seal the work area with protective sheeting. When we leave, your loft is cleaner than when we arrived. That is why homeowners recommend our home spray foam removal in Bath Somerset.
Local Coverage Across Bath
If you need residential spray foam removal near me Bath, we cover every neighbourhood including Oldfield Park, Twerton, Weston and Combe Down. We also offer affordable home spray foam removal Bath Somerset for homeowners on a tight budget. Call 0122 528 5137 and we can usually survey within 48 hours.
What Our Spray Foam Removal Includes
Every residential spray foam removal in Bath includes a free survey, fixed price, full site protection, foam extraction, timber inspection and a removal certificate. We also dispose of the foam at a licensed facility. Extra work such as rot treatment or roof repairs is quoted separately if needed.
Free Loft Survey
We inspect your loft or cavity with a boroscope inspection camera and moisture meter. You get a written report with photos and a fixed price. Surveys take 45 to 60 minutes and there is no charge, even if you decide not to proceed.
Full Site Protection
We lay dust sheets and protective sheeting across floors, stairs and doorways, and seal the work area with a dust extraction unit. This keeps foam dust out of your living space. Setup takes 30 to 45 minutes before any cutting begins.
Foam Extraction
Our technicians remove all accessible spray foam using dry ice blasting machines, reciprocating saws and HEPA filter vacuums. We work carefully around wiring, pipework and roof vents. A typical Bath loft takes one to three days.
Timber Inspection
After removal we check every rafter and joist with a moisture meter and thermal imaging camera. Any rot or structural timber damage is logged. We also confirm roof ventilation is restored so the void can breathe again.
Removal Certificate
You receive a removal certificate and a photo pack showing the bare timbers. This is the documentation mortgage lenders and surveyors ask for. We can also provide a timber condition report if your lender requires one.
Problems We Solve With Spray Foam Removal
Spray foam causes more problems than most homeowners realise. Here are the issues we see most often in Bath, and how we fix them.
Mortgage refusal due to spray foam
Your sale falls through, you lose your buyer and you may have to reduce the asking price. Lenders often refuse because they cannot inspect the roof timbers.
We remove the foam, inspect the timbers and provide a removal certificate with photos. Lenders accept our documentation because it proves the roof void is clean and ventilated. Most Bath sales complete within four weeks of removal.
Spray foam smell and fumes
Persistent chemical smells can make bedrooms unusable and cause headaches. Isocyanate foam is the worst offender and the smell can linger for years.
We remove the foam source using dust extraction units and PPE respirators, then ventilate the loft space. Customers in Widcombe and Larkhall report the smell disappears within 48 hours. We also check for hidden foam behind plasterboard.
Trapped moisture and rot
Closed cell foam seals timbers and stops them breathing. In Bath's damp climate, rot can take hold within two or three winters and spread to structural timbers.
We strip the foam back to bare timber, take moisture readings and treat any early rot. We also restore roof ventilation so the void stays dry. Catching it early saves thousands in structural repairs.
Difficulty selling property
Surveyors flag spray foam as a defect, buyers get cold feet and estate agents advise removal before listing. Your property can sit on the market for months.
We provide a full removal report with before and after photos that you can show to buyers and solicitors. That paperwork has helped dozens of Bath homeowners complete sales that were previously stuck. We can also speak to your surveyor directly.
When You Need Spray Foam Removal in Bath
Your mortgage lender has refused to lend because of spray foam in the roof.
We prioritise mortgage-related removals and can often survey within 48 hours. We remove the foam, inspect the timbers and provide the certificate your lender needs. We also speak to your solicitor or surveyor if required.
You get the documentation to unblock your mortgage and complete your sale. Most Bath homeowners are back on track within four weeks.
You have noticed a chemical smell in the loft or upstairs bedrooms.
We identify the foam type and remove the source using dust extraction units and HEPA vacuums. We ventilate the loft space and check for hidden foam behind plasterboard or under floorboards.
The smell disappears within 48 hours and your upstairs rooms become usable again. We also advise on ventilation improvements to prevent future problems.
A surveyor has flagged trapped moisture or early rot in your roof timbers.
We remove the foam, take moisture readings from every rafter and treat any rot we find. We restore roof ventilation and provide a timber condition report for your records.
Your roof void is dry and ventilated again. Catching rot early saves thousands in structural repairs and protects your property's value.
You are selling your Bath home and want foam removed before listing.
We survey, remove and certify the work, usually within two weeks. You get a full photo pack and removal certificate to show buyers and their solicitors.
Your property is more attractive to buyers and less likely to be down-valued by a surveyor. Many Bath sales complete faster after foam removal.
Tools and Methods We Use
Tools & Equipment
Dry ice blasting machine
Freezes and cracks closed cell foam without damaging timbers. Uses dry ice pellets and leaves no abrasive residue, making it safe around electrical wiring and pipework.
HEPA filter vacuum
Captures fine foam dust and particles during removal. We run it continuously to keep the work area clean and protect your living space from contamination.
Boroscope inspection camera
Lets us see behind rafters, under floorboards and inside cavity walls without cutting large holes. We use it during the survey to identify foam type and extent.
Thermal imaging camera
Detects hidden moisture and cold spots in roof timbers after foam removal. It helps us confirm the roof void is drying correctly and ventilation is working.
Moisture meter
Measures water content in timbers before and after removal. Readings above 20% indicate a problem; we aim to get Bath lofts back under 15% within a week.
Reciprocating saw and oscillating multi-tool
Cuts through dense foam and stubborn sections that dry ice blasting cannot reach. We use fine blades to avoid gouging the timber underneath.
Dust extraction unit
Seals the work area and pulls dust away from your living space. We connect it to the loft hatch so no particles escape into bedrooms or hallways.
Methods
Dry ice blasting
We use dry ice pellets to freeze and crack closed cell foam, then vacuum the debris. This method is safe around wiring and leaves timbers clean. It is our preferred approach for Bath lofts with dense foam.
Mechanical extraction
For open cell foam we use reciprocating saws and oscillating multi-tools to cut the foam into sections, then remove it by hand. This is quicker and cheaper than blasting for softer foams.
Abrasive blasting
For foam bonded to brick, stone or concrete we use abrasive blasting media. This is useful for cellar walls and outbuildings where other methods cannot reach. We control the pressure to avoid damaging the surface.
Thermal softening
For very hard closed cell foam we apply controlled heat to soften the foam before extraction. Our technicians monitor temperature carefully to avoid scorching timbers or igniting debris.
How Spray Foam Removal Works in Bath
Bath has a mix of Georgian terraces, Victorian villas and post-war housing, and each type presents different challenges for residential spray foam removal. Georgian and Victorian roofs often have irregular rafters and limited access, so we use compact dry ice blasting equipment and boroscope cameras to reach awkward corners. Post-war houses in Twerton and Whiteway usually have more regular roof structures, which speeds up removal. Bath's damp climate is a major factor. Trapped moisture and rot develop faster here than in drier parts of the country, so we always take moisture readings before and after removal. We also check roof ventilation is restored, because Bath roofs need to breathe to stay dry. If you need domestic spray foam removal Oldfield Park Bath or anywhere else in the city, we can usually survey within 48 hours. We also offer residential insulation removal Bath 24/7 for urgent mortgage deadlines.
Service Areas
Georgian terraces with tight roof voids and limited access. We use compact equipment and careful handling to avoid damaging historic timbers.
A mix of Victorian and 1970s housing. Many lofts here have closed cell foam that has been in place for 15 to 20 years and is now causing condensation.
Popular with landlords and first-time buyers. We often remove foam here to unblock mortgage applications before a sale completes.
Steep roofs and limited loft access. We use PASMA certified access equipment and work carefully around original stone and slate.
Post-war housing with regular roof structures. Removal is usually quicker here, often one to two days for a standard three-bedroom house.
Local Considerations
Damp climate and high rainfall
Trapped moisture and rot develop faster in Bath than in drier regions. We take moisture readings before and after removal and treat any early rot to prevent structural damage.
Historic building stock
Georgian and Victorian roofs have irregular timbers and limited access. We use compact equipment and hand tools to avoid damaging historic structures.
Listed and conservation-area properties
Some Bath homes are in conservation areas with restrictions on external work. We plan removals to minimise external disruption and avoid the need for planning permission.
Mortgage lender requirements
Lenders often require a removal certificate and timber report before releasing funds. We provide both as standard, which speeds up the sale process for Bath homeowners.
Mortgage Refusal Resolved in Bath
A homeowner in Bath City Centre had their mortgage application refused because a surveyor found spray foam in the loft. The sale was on hold and the buyer was threatening to pull out. The foam was closed cell and had been in place for over 15 years.
We removed the foam in two days, inspected the timbers and provided a removal certificate with photos. The lender accepted the documentation and the sale completed three weeks later. Moisture readings dropped from 26% to 13% within a week.
Maintenance & Follow-up
We advised the homeowner to check roof ventilation annually and keep the loft dry. A follow-up moisture check after 12 months confirmed the timbers were still dry.
A family in Combe Down had noticed a musty smell and condensation on the roof timbers. The loft had closed cell foam that was trapping moisture. A surveyor had flagged early rot in two rafters and recommended urgent removal.
We used dry ice blasting to remove the foam without damaging the timbers. The two affected rafters were treated for rot and roof ventilation was restored. Moisture readings fell from 28% to 11% within ten days.
Maintenance & Follow-up
We fitted additional roof vents and advised the family to keep the loft clear of stored items. A six-month check showed no return of moisture or smell.
A landlord in Oldfield Park needed foam removed from a three-bedroom rental before new tenants moved in. The loft had open cell foam that was causing a chemical smell and failing the letting agent's inspection. The landlord had a two-week deadline.
We surveyed on Monday and started work on Thursday. The foam was removed in two days and the loft was cleaned and certified. The tenants moved in on schedule and the letting agent passed the property without issues.
Maintenance & Follow-up
We provided a removal certificate and photo pack for the landlord's records. We also recommended annual loft inspections to catch any future problems early.
How much does residential spray foam removal cost in Bath?
Most residential spray foam removal in Bath costs between 1200 and 3500 pounds, depending on loft size, foam thickness and access. A standard three-bedroom terrace with open cell foam usually falls at the lower end. Closed cell foam, cavity wall foam or difficult roof access pushes the price up. We give you a fixed price after a free survey.
Do you offer home spray foam removal in Bath, Somerset?
Yes, we cover the whole of Bath and Somerset for home spray foam removal. Our teams work across Bath City Centre, Oldfield Park, Widcombe, Combe Down, Weston and surrounding villages. We can usually arrange a survey within 48 hours and start work within one to two weeks. Call 0122 528 5137 to book.
Can you remove spray foam from my house in Bath?
Yes. We remove open cell and closed cell spray foam from lofts, attics, roof voids and cavity walls in Bath houses. We use dry ice blasting and mechanical extraction to take the foam back to bare timber without damaging your roof. Every job includes a timber inspection and a removal certificate for your records.
Is residential spray foam removal near me available in Bath?
Yes, we are based in Bath and cover every neighbourhood including Larkhall, Walcot, Bear Flat, Moorlands and Newbridge. If you need residential spray foam removal near me Bath, call us and we will confirm the next available survey slot. We also offer 24/7 emergency callout for urgent mortgage deadlines.
Trusted Spray Foam Removal in Bath
Certifications
Reviews
Platinum Shield removed spray foam from our loft in Bath after our mortgage was refused. They were professional, tidy and provided all the paperwork the lender needed. The sale completed without further issues. Highly recommended.
We had a musty smell in the loft for years. The team removed the foam, treated two rafters and restored ventilation. The smell was gone within two days. They explained everything clearly and left the loft spotless.
Fast, friendly and fairly priced. They surveyed on Monday and started on Thursday, which was much quicker than other companies we contacted. The removal certificate helped us complete our sale in Oldfield Park.
I manage rental properties in Bath and have used Platinum Shield twice. Both times they were reliable, provided full documentation and worked around my tenants. I would not use anyone else for spray foam removal.
Related Services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Bath, we cover every neighbourhood in the city. Our local teams can survey your loft within 48 hours and provide a fixed price for residential spray foam removal.
Spray Foam Removal near mesame day Spray Foam Removal
We offer same day spray foam removal in Bath for urgent cases, such as a mortgage deadline or a property sale about to fall through. Call before 10am and we can often have a team on site the same afternoon.
same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal service in Bath is available for emergency callouts, including water leaks into foam or urgent lender deadlines. Call 0122 528 5137 any time and we will arrange the earliest possible visit.
24/7 Spray Foam RemovalCommercial Spray Foam Removal
We also handle commercial spray foam removal for Bath businesses, including warehouses, offices and retail units. The process is the same as residential work but scaled up, with out-of-hours scheduling to avoid disrupting your operations.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is our most common job in Bath. We extract foam from between rafters and joists, inspect the timbers for rot, and restore roof ventilation. Most loft removals take one to three days.
loft spray foam removalroof spray foam removal
Roof spray foam removal in Bath often involves working at height on pitched roofs. Our PASMA certified technicians use safe access equipment to remove foam from roof voids and rafter bays without damaging tiles or felt.
roof spray foam removalAttic spray foam removal
Attic spray foam removal is similar to loft work but often involves tighter spaces and older timbers. We use compact dry ice blasting equipment and boroscope cameras to reach foam in awkward corners of Bath attics.
Attic spray foam removalspray foam insulation removal
Spray foam insulation removal covers all foam types, including polyurethane foam and isocyanate foam. We identify the foam type during the survey and choose the right extraction method for your Bath property.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam removal is usually quicker and cheaper than closed cell removal. The foam is softer and easier to break up with reciprocating saws and oscillating multi-tools. Most Bath lofts with open cell foam take one to two days.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam removal is harder work because the foam is dense and bonded tightly to timbers. We use dry ice blasting machines and abrasive blasting media to break the bond without gouging the wood. Expect two to three days for a typical Bath loft.
closed cell spray foam removalmortgage lender spray foam removal
Mortgage lender spray foam removal is for homeowners whose sale is blocked by a lender. We provide the removal certificate, photo evidence and timber report that lenders require. We have helped dozens of Bath homeowners complete sales after foam removal.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers spray foam, cavity wall insulation and loft insulation. If foam has spread into other insulation materials, we remove and dispose of everything at a licensed waste facility, leaving a clean roof void.
insulation removal serviceinsulation assessment
An insulation assessment is the first step before any removal work. We inspect your loft with a boroscope camera, take moisture readings and identify the foam type. You get a written report and a fixed price for residential spray foam removal in Bath.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting spray foam removal uses dry ice pellets to freeze and crack the foam without damaging timbers. It is our preferred method for closed cell foam in Bath because it leaves no abrasive residue and is safe around electrical wiring.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal is more complex than loft removal because access is through the outer wall. We use boroscope cameras to inspect the cavity, then extract the foam through drilled holes and restore the wall.
Cavity wall spray foam removalsand blasting spray foam insulation removal
Sand blasting spray foam insulation removal uses abrasive blasting media to strip foam from brick, stone and concrete surfaces. It is useful for Bath properties with foam on cellar walls or outbuildings where other methods cannot reach.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat to soften the foam before extraction. It is useful for thick closed cell foam that has hardened over many years. Our technicians control the temperature carefully to avoid scorching timbers.
thermal spray foam removalenvironmentally friendly insulation removal
Environmentally friendly insulation removal means we dispose of foam responsibly and recycle where possible. Dry ice blasting uses no chemicals, and we separate waste streams at a licensed facility. Ask us about our disposal process during the survey.
environmentally friendly insulation removalWarehouse spray Foam removal
Warehouse spray foam removal in Bath and Somerset is a larger-scale job with the same process as residential work. We schedule removals around your operating hours and provide full documentation for insurers and lenders.
Warehouse spray Foam removalBook Your Residential Spray Foam Removal in Bath
If spray foam is blocking your mortgage, trapping damp or making your home hard to sell, we can help. We are TrustMark registered, CHAS accredited and have five years of experience removing foam across Bath. Call 0122 528 5137 for a free survey and fixed price.