Same day Spray Foam Removal in Bath, Somerset
Emergency spray foam removal in Bath, booked today, cleared today
When a mortgage lender flags spray foam in your loft or a surveyor finds foam in a Bath roof, you need it gone fast. Our same day Spray Foam Removal in Bath sends a trained crew to your property with dry ice blasting kit, dust extraction and a written condition report. We cover Bath City Centre, Kingsmead, Combe Down and every BA postcode, and we take emergency spray foam removal in Bath, Somerset calls seven days a week. Call 0122 528 5137 and we will tell you honestly whether we can be with you today.
What same day Spray Foam Removal in Bath involves
same day Spray Foam Removal in Bath is a rapid-response insulation extraction service that removes open cell spray foam, closed cell spray foam and polyurethane foam from lofts, rafters and cavity walls, usually within hours of your call. We start with a boroscope inspection camera and thermal imaging camera to map exactly where the foam sits and whether trapped moisture and rot have taken hold behind it. Then we cut, blast and vacuum the material out, bag it, and leave the timbers clean enough for a surveyor to inspect the same day.
Bath homes get hit hardest by foam problems because so much of the housing stock is Victorian or Georgian terraces with tight roof voids and limited ventilation. Foam sprayed onto the underside of a slate roof traps warmth and moisture, and by the time a surveyor spots it you are facing mortgage refusal due to spray foam or a stalled sale. If you are searching for same day spray foam removal near me Bath, we treat it as urgent: a lender's valuer will not wait, and neither should you.
Why Bath homeowners book same day removal
Foam removal is not a job you can sit on when a mortgage, a sale or a damp patch is on the line. These are the four outcomes our Bath customers ask for most, and the reasons they call us instead of waiting three weeks for a general builder.
Unblocks a stalled sale
A valuer's report flagging spray foam can stop a mortgage offer dead. We remove the foam, document the timbers with photos, and hand you a report your lender can read. Most Bath sales we unblock complete within four to six weeks of the removal date.
Stops moisture and rot
Closed cell foam seals a roof so tightly that condensation has nowhere to go. We open the void back up, check rafters with a moisture meter, and treat any early rot before it spreads. Left alone, trapped moisture and rot can cost thousands in structural timber repairs.
Clears foam smell fast
Freshly sprayed isocyanate foam can off-gas for weeks, and some Bath lofts still smell of spray foam smell and fumes years later. Dry ice blasting lifts the residue without solvents, so the loft air clears quickly and you can use the space again without a respirator.
Same-day, seven days a week
We run urgent spray foam removal Bath 24/7 slots for survey deadlines, exchange dates and water ingress. Call before midday and we aim to have a crew at your property the same afternoon, with extraction kit sized for anything from a single loft to a full terrace roof.
How our same day removal process works
Five steps, one day in most cases. You will know the price before we start, and you will see the roof void clean before we pack up. Here is exactly what happens from your first call to the final report.
Phone triage
You call 0122 528 5137 and describe the property, the foam type and your deadline. We ask about access, roof pitch and whether a lender or surveyor is involved. Within ten minutes you get a realistic arrival window and a fixed price range, not a vague estimate.
On-site survey
Our technician arrives with a boroscope inspection camera, thermal imaging camera and moisture meter. We photograph the foam, check rafters for damp and confirm whether it is open cell or closed cell. This survey takes 30 to 45 minutes and tells us which removal method will be fastest.
Containment setup
We lay dust sheets and protective sheeting across floors and stairwells, seal the loft hatch, and run a dust extraction unit with HEPA filter vacuum to keep airborne particles out of your living space. In occupied Bath flats this stage matters as much as the removal itself.
Foam extraction
Using a reciprocating saw and oscillating multi-tool to cut the bulk away, we then dry ice blast the residue off rafters and felt. Dry ice pellets freeze the foam so it releases cleanly without solvents or water. A typical loft takes three to five hours; a full roof takes a day.
Clearance and report
We vacuum every surface, bag the waste for licensed disposal, and photograph the exposed timbers. You receive a condition report with moisture readings the same day, ready to forward to your lender, surveyor or buyer. We also flag any timber that needs a follow-up treatment.
Five years of spray foam removal in Bath
Platinum Shield Spray Foam has been removing spray foam across Bath and Somerset since 2021. In five years we have cleared foam from Victorian terraces in Widcombe, 1970s estate lofts in Twerton and warehouse roofs on the edge of the city. Our technicians hold BPCA certification, CHAS accreditation and PASMA for safe working at height, and we follow the manufacturer guidance published by Isothane, Soudal and Recticel when assessing foam condition. Every job is documented to a standard that satisfies lenders, and we carry a 5-year workmanship warranty on removal work.
- BPCA-certified technicians trained in foam identification and safe extraction
- CHAS accredited and Constructionline registered for domestic and commercial work
- PASMA-trained for safe access to lofts, rafters and warehouse roof voids
- NVQ Level 2 Insulation qualified, with ongoing dry ice blasting training
- TrustMark registered and Which? Trusted Trader approved across Somerset
Why Bath chooses our same day Spray Foam Removal
Plenty of builders will quote for foam removal. Very few can be at your property today with the right extraction kit and a report your lender will accept. That combination is what we built this service around.
Genuine same-day arrival
We hold same-day slots for Bath and the surrounding BA postcodes. Call before midday and we aim to be on site the same afternoon. For emergency spray foam removal Bath Somerset jobs with a survey deadline, we will tell you honestly on the phone whether we can make it.
Dry ice, not chemicals
We use dry ice blasting machines rather than solvent washes. Dry ice pellets lift foam off rafters without soaking timbers or leaving residue, which matters in old Bath roofs where added moisture causes more damage than the foam itself. It is also the fastest method for closed cell foam.
Lender-ready documentation
Every removal ends with a photographic condition report and moisture readings. We have helped Bath homeowners clear mortgage refusal due to spray foam by giving valuers the evidence they need. The report is included in the price, not sold as an extra.
Fixed pricing before we start
You get a fixed price after the on-site survey, before any cutting begins. No hourly creep, no surprise disposal charges. For spray foam removal today in Bath, that certainty is often the difference between hitting an exchange date and losing a buyer.
What our same day removal includes
Every same-day job includes the survey, the removal, the cleanup and the documentation. We do not split those into separate charges or leave you to arrange a report afterwards. Here is what is covered when you book same day Spray Foam Removal in Bath.
On-site foam survey
A boroscope inspection camera, thermal imaging camera and moisture meter check the foam type, coverage and timber condition. This takes 30 to 45 minutes and determines the fastest safe removal method for your property.
Containment and dust control
Dust sheets, protective sheeting and a dust extraction unit with HEPA filter vacuum keep foam particles out of your living space. Essential in occupied Bath flats and terraces where the loft hatch opens onto a landing.
Full foam extraction
We cut bulk foam with a reciprocating saw and oscillating multi-tool, then dry ice blast the bonded residue off rafters and felt. A standard loft takes three to five hours; larger roof voids take a full day.
Waste removal and disposal
All removed foam is bagged and taken away for licensed disposal. You are not left with skips, bags or a loft full of debris. We clear the site the same day and leave floors and stairwells as we found them.
Photographic condition report
We photograph the exposed timbers and record moisture readings before we leave. The report is written for lenders and surveyors, and we have used it to clear mortgage refusal due to spray foam for Bath homeowners more than once.
Problems our same day removal solves
Foam problems rarely announce themselves politely. They show up as a refused mortgage, a damp patch on a bedroom ceiling or a smell you cannot place. These are the four situations we are called to most often across Bath.
Mortgage refused because of spray foam
The sale stalls, your buyer walks and you are back to viewings while the foam stays in the roof. Every week of delay costs you money and momentum.
We remove the foam the same day, document the timbers with photos and moisture readings, and give you a report your lender's valuer can act on. Most Bath sales we unblock complete within four to six weeks of removal.
Trapped moisture and rot in rafters
Closed cell foam seals the roof void, condensation has nowhere to escape, and timber starts to soften. Left for a year or two, structural timber damage becomes a much bigger repair.
We open the void back up, check every rafter with a moisture meter and treat early rot before it spreads. Dry ice blasting removes the foam without adding water, which is critical in old Bath roofs.
Spray foam smell and fumes in the loft
Isocyanate foam can off-gas for weeks and some lofts still smell years later. It makes the space unusable and raises questions at every viewing.
Dry ice blasting lifts the foam and its residue without solvents, so the loft air clears quickly. We bag and remove all material the same day, leaving no chemical trace behind.
Reduced roof ventilation and cavity wall damp
Foam blocks eaves gaps and bridges cavities, so moisture collects on internal walls. Damp patches spread, plaster blows and buyers notice immediately.
We clear foam from eaves, rafters and cavity walls, restore airflow and check wall ties while we are in there. You get a dry, ventilated structure and a report showing what was done.
When to book same day spray foam removal
A Bath buyer's mortgage valuation flags spray foam in the loft and exchange is two weeks away.
We prioritise lender-driven jobs and aim to be on site the same day. The crew removes the foam, photographs the timbers and issues a condition report you can forward to the valuer that evening.
The lender reviews the report, the retention is lifted and the sale proceeds without losing your buyer.
A landlord in Oldfield Park finds a damp patch spreading across a bedroom ceiling.
We survey with a moisture meter and thermal imaging camera, confirm the foam is trapping condensation, then remove it and clear the eaves ventilation in one visit.
The damp source is removed, the ceiling dries out and the flat stays lettable without a void period.
A homeowner in Combe Down cannot use the loft because of chemical fumes from old foam.
Dry ice blasting removes the foam and residue without solvents. We run a HEPA filter vacuum throughout and bag all waste for licensed disposal the same day.
The loft air clears within days and the space becomes usable again for storage or conversion.
A commercial unit near Bath needs foam cleared from a warehouse roof deck before an insurance inspection.
We scale the crew and equipment to the building, work outside trading hours where needed, and use abrasive blasting media on stubborn residue that dry ice alone will not shift.
The roof deck passes inspection and the documentation is filed with the insurer.
Tools and methods we use
Tools & Equipment
Dry ice blasting machine
Freezes bonded foam so it releases from rafters and felt without solvents or water. Our primary method for closed cell foam and the reason we can finish most lofts in a single visit.
Boroscope inspection camera
Lets us see behind plasterboard, into eaves and along rafters without opening up the structure. We use it during the survey to confirm foam coverage and spot hidden damp.
Thermal imaging camera
Reveals cold bridges, trapped moisture and gaps in insulation that the eye cannot see. It guides where we cut and confirms the roof void is drying correctly after removal.
Moisture meter
Gives a numeric reading for every rafter we expose. Those readings go into your condition report and give a lender or surveyor something concrete to assess.
Reciprocating saw and oscillating multi-tool
Cut the bulk of open cell and closed cell foam away quickly and cleanly, including in tight attic corners where a full-size saw will not fit.
Dust extraction unit and HEPA filter vacuum
Capture airborne foam particles at the source and clean every surface before we leave. Essential in occupied Bath flats where the loft hatch opens onto a landing.
PPE respirator and chisel and scraper set
Protects our technicians from isocyanate dust and lets us hand-finish edges around rafters, wall plates and awkward joints that machines cannot reach.
Methods
Dry ice blasting removal
Dry ice pellets are accelerated at the foam, freezing it so it embrittles and lifts off the substrate. No water, no solvents, no secondary residue. It is the fastest method for closed cell foam bonded to timber and the one we default to on older Bath roofs.
Mechanical cutting and extraction
For open cell foam and large volumes, we cut the bulk away with a reciprocating saw and oscillating multi-tool, then vacuum the residue with a HEPA filter vacuum. This keeps the job fast and controls dust in occupied properties.
Abrasive blasting for stubborn residue
Where foam has cured onto brick, concrete or steel, abrasive blasting media removes what cutting tools leave behind. We use it selectively on commercial and warehouse jobs, with full containment to protect surrounding surfaces.
Moisture mapping and ventilation reinstatement
After removal we map moisture across the timbers, clear blocked eaves gaps and confirm airflow is restored. This step is what prevents the damp problem returning and what lenders want to see documented.
Waste handling to licensed disposal
All foam, dust and contaminated insulation is bagged on site and removed through licensed waste routes. We do not leave skips on your driveway or bags in the loft for you to deal with.
How same day removal runs in Bath
Bath is a city of tight roof voids and old slate. Georgian and Victorian terraces in Widcombe, Bathwick and Lansdown were built long before spray foam existed, and their roofs rely on eaves ventilation that foam blocks completely. Add Somerset's damp winters and you get condensation trapped against rafters for months at a time. That is why so many of our same-day callouts start with a surveyor's report rather than a visible leak. We keep crews inside the city, so a job in Kingsmead or Combe Down rarely waits on travel. For urgent spray foam removal Bath 24/7, we schedule evening and weekend slots around exchange dates and tenant access. If you need emergency insulation removal Bath Somerset style, with a lender watching the clock, call before midday and we will confirm a same-day arrival.
Service Areas
Dense Victorian terraces with narrow roof voids. Foam here often blocks the only eaves ventilation gap, so we clear and reinstate airflow in the same visit.
A mix of stone cottages and newer builds on the southern slope. Older properties here frequently have closed cell foam bonded hard to rafters, which needs dry ice blasting.
High concentration of rental flats and converted houses. We plan removals around tenant access and keep dust containment tight because lofts open onto shared landings.
Central Bath with a mix of commercial units and apartments. Warehouse and plant room foam jobs here often run outside trading hours to avoid disruption.
Post-war housing with shallower roof pitches. Foam spread across larger areas here, so we size extraction equipment to the volume rather than the property type.
Local Considerations
Damp Somerset winters and driving rain
Roof voids stay humid for months, so any foam that blocks ventilation traps moisture against timber. We check moisture readings before and after removal and flag anything that needs further drying.
Listed and conservation-area buildings
Many Bath roofs cannot be altered externally. Dry ice blasting removes foam from inside the void without touching the slate or the streetscape, which keeps conservation officers satisfied.
Tight loft access in period terraces
Hatches are often small and stairwells narrow. We use compact cutting tools and modular extraction kit that fits through a standard hatch without removing doors or banisters.
High rental turnover near the city centre
Landlords need voids kept short. We schedule same-day removals around tenancy changeovers and issue documentation the same evening so re-letting is not delayed.
Mortgage refusal cleared in Widcombe
A three-bed Victorian terrace in Widcombe had closed cell foam sprayed across the entire roof void. The buyer's lender refused the mortgage and the sale stalled with exchange three weeks away. The loft had no ventilation and two rafters showed early damp.
We removed the foam with dry ice blasting in a single day, cleared the eaves gaps and treated the two damp rafters. Moisture readings dropped from 24% to 14% within a fortnight. The lender accepted our photographic report and the sale completed on the original date.
Maintenance & Follow-up
Keep eaves vents clear and check the loft once each autumn for any sign of condensation. We recommend a moisture reading every two years, which we can do during a routine insulation assessment.
A first-floor rental flat in Oldfield Park had a damp patch spreading across a bedroom ceiling. Foam had bridged the cavity and blocked ventilation, and the tenant had been complaining for months. The landlord was facing a void period if it was not fixed quickly.
We surveyed with a thermal imaging camera, confirmed the foam was the cause, and removed it from the cavity and roof void in five hours. The ceiling dried out over ten days and the flat was re-let to the same tenant without a void period.
Maintenance & Follow-up
Check internal walls for new damp patches each season and keep bathroom extractors running. A cavity inspection every three years catches bridging before it spreads.
A stone cottage in Combe Down had foam sprayed years earlier and the loft still smelled of chemicals. The owners had stopped using the space entirely and were worried about what the foam was doing to the roof timbers beneath it.
Dry ice blasting removed the foam and its residue without solvents, and a HEPA filter vacuum cleared the air. The loft was odour-free within a week. All waste was bagged and removed the same day, and the timbers were photographed for the owners' records.
Maintenance & Follow-up
Leave the loft hatch open for a few hours after warm spells to keep air moving. An annual visual check of the rafters is enough to catch any recurrence.
Can I get same day spray foam removal in Bath?
Yes, in most cases. Call 0122 528 5137 before midday and we can usually have a crew at your Bath property the same afternoon, provided access is straightforward. A single loft takes three to five hours, so an afternoon start still finishes the same day. If we cannot make it today, we will offer the earliest slot and hold it for you.
Do you offer emergency spray foam removal in Bath, Somerset?
We do. Emergency spray foam removal in Bath, Somerset is available seven days a week for survey deadlines, exchange dates and water ingress. We prioritise jobs where a mortgage or sale is at risk. Call us, describe the deadline, and we will confirm within ten minutes whether we can be with you today or first thing tomorrow.
How quickly can you do spray foam removal in Bath?
A typical loft takes three to five hours on site, and a full roof or large terrace can take a full day. From your first call to a finished, documented job, most Bath customers are done within 24 to 48 hours. The on-site survey adds 30 to 45 minutes, and we book it into the same visit.
Is same day spray foam removal available near me in Bath?
If you are anywhere in Bath or the BA postcodes, yes. We cover Bath City Centre, Kingsmead, Walcot, Combe Down, Twerton, Weston, Oldfield Park and the surrounding neighbourhoods. Distance within the city rarely affects our arrival time. Call with your postcode and we will confirm the same-day slot straight away.
Certified, accredited, accountable
Certifications
Reviews
Rang on a Tuesday morning about foam in our Bath loft and they were here by two. Dry ice blasting, no mess, and a report with photos by the evening. Our mortgage went through the following week.
We had foam bridging the cavity in our Oldfield Park flat and a damp patch that would not go away. They found the cause in 20 minutes and had it removed the same day. Honest pricing and no upselling.
Professional from the first phone call. The technician explained exactly what the foam was doing to our rafters and showed us the moisture readings before and after. Clean, tidy and finished on time.
Used them for a warehouse roof deck near Bath. They worked overnight so our operation kept running and left the site spotless. Documentation was ready for our insurer the next morning.
Related Services
Spray Foam Removal near me
Our local search service puts a removal crew on your doorstep anywhere in Bath. If you need same day Spray Foam Removal in Bath, this is the fastest route from search to booked job, with no call centre in between.
Spray Foam Removal near me24/7 Spray Foam Removal
For water ingress, survey deadlines or a buyer threatening to walk, our 24/7 line keeps a technician reachable around the clock. We schedule overnight and weekend removals across Bath when the job cannot wait for Monday.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Most of our same day work is domestic: lofts, rafters and cavity walls in Bath terraces, semis and flats. We protect carpets, stairwells and neighbouring rooms with dust sheets and extraction, so your home stays liveable while we work.
Residential Spray Foam RemovalCommercial Spray Foam Removal
Warehouses, workshops and commercial units around Bath often carry foam on roof decks and plant rooms. We schedule same-day commercial removals outside trading hours where needed, with documentation for facilities managers and insurers.
Commercial Spray Foam Removalloft spray foam removal
Loft foam is the most common same-day callout in Bath. We cut and blast foam from rafters and felt, restore ventilation, and leave the void clean enough for a surveyor to inspect the same day you call us.
loft spray foam removalroof spray foam removal
Foam sprayed directly onto roof timbers traps moisture against slate and felt. Our roof removal service uses dry ice blasting to lift foam without damaging the roof covering, which keeps repair costs down on older Bath properties.
roof spray foam removalAttic spray foam removal
Attic spaces in Bath are often tight, low and awkward to access. We use compact cutting tools and a HEPA filter vacuum to clear foam from confined attic voids, then photograph the timbers for your records.
Attic spray foam removalspray foam insulation removal
Full insulation extraction for lofts, walls and roof voids, including open cell and closed cell material. This is the broader service behind our same-day callouts, and it covers every foam type we encounter in Somerset.
spray foam insulation removalopen cell spray foam removal
Open cell foam is softer and quicker to remove, often in two to three hours for a standard Bath loft. We cut it out with a reciprocating saw, vacuum the residue and check the timbers for damp before we finish.
open cell spray foam removalclosed cell spray foam removal
Closed cell foam sets hard and bonds to timber, so it needs dry ice blasting rather than simple cutting. We freeze the foam so it releases cleanly, which protects rafters and speeds up a same-day turnaround.
closed cell spray foam removalmortgage lender spray foam removal
When a lender refuses a mortgage because of spray foam, speed matters. We remove the foam, document the timbers and provide a report your valuer can act on, helping Bath buyers and sellers get back on track quickly.
mortgage lender spray foam removalinsulation removal service
Beyond foam, we remove contaminated or failing insulation from lofts and cavities. If foam has spread into existing loft insulation, we take both out in one visit and leave the space ready for a clean reinstall.
insulation removal serviceinsulation assessment
Not sure whether the foam in your Bath property is a problem? Our assessment uses a boroscope inspection camera, thermal imaging camera and moisture meter to tell you exactly what you have and what it will take to remove it.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting is our preferred method for bonded foam. Dry ice pellets freeze the foam so it lifts off rafters without solvents or water, which is ideal for older Bath roofs where added moisture causes further damage.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall foam can trap damp and bridge the cavity, leading to cavity wall damp on internal walls. We remove it in sections, check the wall ties and leave the cavity clear for a proper assessment.
Cavity wall spray foam removalsand blasting spray foam insulation removal
For stubborn residue on brick, concrete and steel, abrasive blasting media removes what cutting tools leave behind. We use it selectively on commercial and warehouse jobs where dry ice alone will not clear the surface.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal foam applied to hot roof decks and plant rooms sets differently from standard foam. We assess it with a thermal imaging camera first, then choose the removal method that avoids damaging the substrate.
thermal spray foam removalenvironmentally friendly insulation removal
We bag and dispose of foam through licensed waste routes and avoid solvent-based removal wherever possible. Dry ice blasting leaves no chemical residue, which keeps the job cleaner for your home and the wider Bath environment.
environmentally friendly insulation removalWarehouse spray Foam removal
Large roof decks and mezzanine voids in Bath warehouses need volume extraction, not a loft kit. We scale crews and equipment to the building and can work overnight so your operation keeps running.
Warehouse spray Foam removalBook same day Spray Foam Removal in Bath today
Platinum Shield Spray Foam is TrustMark registered and has been clearing foam across Bath since 2021. Call 0122 528 5137 now, describe your deadline, and we will tell you honestly whether we can be at your property today. Fixed price confirmed on site before any work begins.